GH Series Float and Thermostatic Steam Trap

Product Description

Restrictions
Design Pressure(PMA):	Maximum operating pressure (PMO) @ maximum operating temperature (TMO)
GH3 type: 100bar	GH3 type: 45bar@399°C
GH5 type: 40bar	GH5 type: 21bar@399℃

Technical Parameters

Model		GH3	GH5
Connection Type		Welding and flange preparation
Installation		Horizontal connection →
Maximum working pressure difference (PMX)	(A)	10bar	10bar
	(B)	16bar	16bar
	(C)	21bar	21bar
	(D)	45bar	/

Dimensions/Weight (approximate) mm and Kg

Model		GH3										GH5
Nominal pressure		PN50				PN110						PN40
Nominal diameter		25	32	40	50	25	32	40	50	65	80	50	65	80	100
A(mm)		427		437	457	520						570
B(mm)		115										100
C(mm)		245										305
D(mm)		230										250
Weight(Kg)	Flange	32	33	35	38	40	41	42	44	46	48	40	42	44	48

Explore More

RELATED PRODUCTS

SFT43 Series Float Steam Trap

Maximum pressure difference 14bar, maximum displacement up to 31000Kg/h

Features

The upper and lower double valve discs in a balanced state are subjected to the same surface pressure inside the valve body, and only a small force is required to open them. Even if the volume of the float is reduced, the large displacement function can still be ensured.

An anti-erosion baffle is installed in the valve body to prevent the steam flow from impacting the float.

Built-in automatic air exhaust device, quick start-up without air blockage, good performance in exhausting non-condensable gases.

600 Series Inverted Bucket Steam Trap

Horizontal installation, maximum pressure difference 21.8bar, maximum displacement up to 9072Kg/h

Materials

Valve body, valve cover: GGG40/WCB/CF8

Valve seat: Martensitic stainless steel

Valve disc: Martensitic stainless steel

Other internal parts: stainless steel

CAGH Series Float Steam Traps

Maximum pressure difference 45bar, maximum displacement up to 10500Kg/h

Features

Balanced double valve seat design, small size and large displacement.

Equipped with DN25 flange balance pipe structure to prevent air blockage.

The float moves up and down depending on the amount of liquid flowing in, and the valve opening is automatically adjusted to discharge the liquid continuously.

SC Series Replaceable Valve Seat Thermodynamic Steam Traps

Horizontal installation, maximum pressure difference 21bar, maximum displacement up to 1500Kg/h

Features

The valve seat drainage holes are set to three holes evenly distributed, the action is stable, the valve seat wear is less, and the heat insulation cover reduces the empty striking phenomenon.

Online replacement valve seat module, easy maintenance.

CA44/CA46 Series Float Air Traps

Horizontal installation, maximum pressure difference 32bar, maximum displacement up to 2800Kg/h

Features

It is a continuous drainage method with excellent drainage capacity.

The structure is simple, and the internal parts are all installed on the valve cover, so they can be repaired without removing them from the pipe.

With 1/2″ female balancing port.