CAGH Series Float and Thermostatic Steam Traps

Product Description

Materials	Restrictions
• Valve body, valve cover: carbon steel, stainless steel • Valve seat: martensitic stainless steel • Valve disc: martensitic stainless steel • Other internal parts: stainless steel	Design pressure (PMA) • GH3 type: 100bar • GH5 type: 40bar	Maximum operating pressure (PMO) @ maximum operating temperature (TMO) • GH3 type: 45bar@399℃ • GH5 type: 21bar@399℃

Technical Parameters

model		CAG3	CAG5
Connection Type		Flange
Installation		Horizontal connection
Maximum working pressure difference (PMX)	(A)	10bar	10bar
	(B)	16bar	16bar
	(C)	21bar	21bar
	(D)	45bar	/

Dimensions/Weight (approximate) mm and Kg

model		CAG3										CAG5
Nominal pressure		PN50				PN110						PN40
Nominal diameter		、25	32	40	50	25	32	40	50	65	80	50	65	80	100
A(mm)		427		437	457	520						570
B(mm)		115										100
C(mm)		245										305
D(mm)		230										250
Weight(Kg)	Flange	32	33	35	38	40	41	42	44	46	48	40	42	44	48

Explore More

RELATED PRODUCTS

ES Series Bell Float Steam Traps

Horizontal installation (side inlet and side outlet) maximum pressure difference 65bar, maximum displacement up to 3500Kg/h

Materials

Valve body:WCB/CF8/WC6

Valve seat: Martensitic stainless steel

Valve disc: Martensitic stainless steel

Other internal parts: stainless steel

401-SH 501-SH Series Inverted Bucket Superheated Steam Traps

Vertical installation (bottom inlet, top outlet) Maximum pressure difference 105 bar, maximum displacement up to 430 kg/h

Features

401-SH/501-SH series inverted bucket superheated steam traps are specially designed to overcome various unfavorable factors such as overheating, high pressure and low load.

In order to make the steam trap work properly under extremely harsh working conditions, the valve adopts a unique inverted bucket type steam trap with a water collection chamber. The water collection chamber collects enough condensate to ensure that the water seal can be maintained during the entire discharge cycle. The small cup in the water collection chamber can float up and down at the side steam pipe mouth. When the condensate rises, it seals the steam inlet pipe. The condensate flows into the valve. Since the water collection chamber collects the condensate and allows steam to flow in from the bottom of the inverted bucket, the discharge valve is tightly closed during the water collection period, and there is no dripping phenomenon.

HR Series Replaceable Valve Seat Thermodynamic Steam Traps

Horizontal installation, maximum pressure difference 260bar, maximum displacement up to 760Kg/h

Features

Online replaceable valve seat module for easy maintenance.

Highly precision ground discs ensure a tight seal.

The heat shield reduces heat radiation losses and increases the cycle time under no-load conditions, extending the service life.

Can withstand overheating, water hammer, freezing, and corrosive condensation.

The “click” sound when the disc falls into the valve seat makes it easy to check the working performance.

With built-in large filter area to ensure trouble-free operation.

2X Series Large Displacement Double Chamber Float Steam Trap

Maximum pressure difference 32bar, maximum displacement up to 252000Kg/h

Features

The double-chamber design is equipped with a pair of balanced double valve seats, so the displacement is very large.

1000 Series Inverted Bucket Steam Traps

All stainless steel, vertical installation (bottom inlet, top outlet), maximum pressure difference 45 bar, maximum displacement up to 2000 kg/h

Features

Under the same conditions, the service life of the 1000 series stainless steel inverted bucket steam trap is generally 3-4 times longer than that of traditional steam traps.

The valve hole is located at the top of the valve, so dirt will not accumulate on the valve hole

Long service life and high reliability

Closed design, compact structure

CAGH Series Float Steam Traps