DC1 Series Pressure Balanced Thermostatic Steam Traps

Product Description

Materials	Restrictions	Notice
• Valve body, valve cover: austenitic stainless steel • Valve seat: stainless steel • Valve disc: stainless steel • Liquid capsule: stainless steel • Other internal parts: stainless steel	• Design pressure (PMA): 25bar • Maximum operating pressure (PMO): 21bar • Maximum operating temperature (TMO): 260℃	When condensate is discharged into a condensate recovery line with back pressure, it is recommended to install a check valve after the valve.

Technical Parameters

model		DC1-21H	DC1-21L
Connection Type		Thread, chuck, flange
Installation		Any direction
Subcooling		5℃	15℃
Maximum working pressure difference (PMX)	(A)	21bar

Dimensions/Weight (approximate) mm and Kg

model		DC1-21(F)
Nominal diameter		10	15	20	25
A(mm)		75			80
A1(mm)		150			160
0B(mm)		17			21
C(mm)		32			35
D(mm)		53
Weight(Kg)	Thread	0.3			0.5

Explore More

RELATED PRODUCTS

CA44/CA46 Series Float Air Traps

Horizontal installation, maximum pressure difference 32bar, maximum displacement up to 2800Kg/h

Features

It is a continuous drainage method with excellent drainage capacity.

The structure is simple, and the internal parts are all installed on the valve cover, so they can be repaired without removing them from the pipe.

With 1/2″ female balancing port.

CA14 Series Float Type Air Trap

Horizontal installation, maximum pressure difference 14bar, maximum displacement up to 700Kg/h

Features

It is a continuous drainage method with excellent drainage capacity.

The structure is simple, and the internal parts are all installed on the valve cover, so they can be repaired without removing them from the pipe.

With 3/8″ internal thread balance port.

VB Series Vacuum Breaker

Working principle

Vacuum breakers are used to break the vacuum in steam systems, which can effectively protect the equipment from being in a vacuum state when steam condenses.

Its principle is similar to that of a one-way valve. When the internal pressure of the system is lower than the atmospheric pressure, the vacuum breaker opens. If the internal pressure of the system is high, the vacuum breaker is closed. It is used in: heat exchangers, steam storage tanks, boilers, sandwich pots, sterilization chambers, and steam main lines.