Features
LS universal connector can be connected to steam traps with universal joints. The connector can be connected to the pipe horizontally or vertically. The steam trap installed on the connector can be rotated to any angle to ensure that the steam trap is in a horizontal state.
Built-in filter
Made of stainless steel, durable
Provide thread, welding and flange forms for selection
Suitable for various steam traps
| Available models | Restrictions |
| •LS: threaded connection •LSW: socket welding/butt welding •LSF: flange connection •Installation method: universal | • Design pressure (PMA): 40bar • Maximum operating pressure (PMO): 32bar • Maximum operating temperature (TMO): 427°C |
| Install | |
| The following points must be noted during installation to ensure the normal operation of the steam trap. The universal connector can be installed in any direction, but the medium flow direction must be consistent with the direction of the arrow on the connector. The connection surface connected to the rotary steam trap must be a vertical surface. To avoid heat loss, the universal connector can be insulated, but the steam trap should not be insulated. For easy maintenance and replacement, shut-off valves must be installed at both ends of the universal connector. | |
Dimensions/Weight (approximate) mm and Kg
| model | LS、LSW | LSF | ||||
| Nominal diameter | 15 | 20 | 25 | 15 | 20 | 25 |
| A(mm) | 100 | 160 | ||||
| B(mm) | 29 | |||||
| C(mm) | 55 | |||||
| D(mm) | 65 | |||||
| Weight(Kg) | 0.8 | 1.5 | 2 | 3 | ||
