VSM Series Combined Condensate Recovery Station

Vertical installation (bottom inlet, top outlet) maximum pressure difference 17 bar, maximum displacement up to 9072 kg/h

Materials

Valve body, valve cover: WCB/CF8

Valve seat: Martensitic stainless steel

Valve disc: Martensitic stainless steel

Other internal parts: stainless steel

Any installation, maximum pressure difference 21bar, maximum displacement up to 650Kg/h

Features

The SCCV automatic centering closing system allows the internal components to softly contact each other and accurately position: the closing is very reliable and the service life is extended.

Resistant to water hammer, corrosion and freezing, with excellent air exhaust performance.

It is resistant to high temperature and high pressure, and the discharge temperature can be adjusted at will within its pressure/temperature range, and there is no noise when it operates.

Can be installed in any direction

Features

The overall hot forging process has high material density and is particularly suitable for harsh working conditions such as high temperature, high pressure, toxicity, and strong permeability.

The bellows gate valve adopts an embedded threaded double-stem structure. The upper stem does not rise or fall when the gate is opened or closed, and the bellows does not rotate, which reduces the opening space and protects the bellows.

The upper valve stem is equipped with a clamping ring and a bearing structure, which is compact and has low torque.

The inner and outer guide structure is adopted, so that the bellows and the lower valve stem have good stability.

Using bellows with larger diameter and pitch can increase the allowable displacement of a single wave, which can effectively extend the service life of the bellows under the same stroke.

The outer guide sleeve designed for the bellows gate valve protects the bellows from direct erosion by the medium, thus greatly improving the service life of the bellows.

All stainless steel, with universal joint, maximum pressure difference 28bar, maximum displacement up to 590Kg/h

Features

The 2000 series universal joint can quickly install the inverted bucket steam trap in any pipeline for long-term use without changing the pipeline. This not only obtains the reliability of the inverted bucket operating principle, but also has all the advantages of using an all-stainless steel structure. The universal joint also adds the feature of quick and easy replacement on the pipeline. In addition, the universal joint has a built-in filter

Fully enclosed, flexible housing

Compact and lightweight

Freeze-resistant and damage-free

Maximum pressure difference 13bar, maximum displacement: (cold water 1400Kg/h), (hot water 800Kg/h)

Features

Brass valve body and stainless steel internal parts provide excellent corrosion resistance.

Lightweight, compact design, easy to install.